| Controlled Slew Rate |
YES |
| Enable Logic |
Active High |
| Output Discharge |
NO |
| Programmable Current Limit |
YES |
| Current Limit （Min）(A) |
0.1 |
| Current Limit （Max）(A) |
2.5 |
| Reverse Current Blocking |
YES |
| Fault Flag |
YES |
| Power Supply (Min) (V) |
2.5 |
| Power Supply (Max) (V) |
5.5 |
| Temperature |
-40℃~85℃ |
| IO Level (V) |
1.2 |
| Package (mm) |
FCQFN 1.2X1.2-9L |
VIN: 2.7~5.5V
28V Absolute Rating at VOUT
2.5A Continuous Current Capability
Adjustable Current Limit:0.1A~2.5A (Typ.)
0.5A~2.5A with 7% Accuracy
<0.5A with 10% Accuracy
<0.3A with 15% Accuracy
Ron: 80mΩ (Typ.)
Soft-start
Output OVP: Typ.=5.8V
No Output Discharge During Off State
Open-Drain over-current fault flag
Thermal Shutdown
Under-Voltage Lockout (UVLO)
True Reverse-Current Blocking (TRCB)
Shut-Down Supply Current: 0.5μA
FCQFN 1.2mm×1.2mm-9L package
AW35061 is a current-limiting protection switch, 80mΩ(Typ.), low resistance MOSFET switch intended to be inserted between a power source and a load to isolate and protect against abnormal voltage and current conditions. The input operating voltage range is between 2.7V to 5.5V. The output terminal is rated 28V absolute maximum.
The internal soft-start circuit controls inrush current due to highly capacitive loads. The device features very low quiescent current. The supply current reduces to 0.5μA in shut-down state.
The AW35061 has True Reverse-Current Blocking (TRCB) protection to avoid undesired reverse current from output to its input in either enabled or disabled states.
The AW35061 also features several additional protection functions, such as output over-voltage (OVP) and input under-voltage protection (UVLO), plus over-current (with Fault-flag) and thermal protection.
