Channel |
8 |
LED Output |
0 |
Gesture Detection |
Click Slide |
ISD (μA) |
/ |
Istandby (μA) |
6.5 |
Capacitance Resolution(fF) |
0.001 |
Power Supply (Min) (V) |
2.7 |
Power Supply (Max) (V) |
3.6 |
Temperature |
-40℃~105℃ |
Flash |
YES |
Package (mm) |
QFN 3X3-24L |
1. 8-channel capacitive sensor
Self/Mutual capacitive sensing
Capacitance resolution down to 1aF
Automatic Offset Tuning (AOT)
Adaptive Temperature Compensation
Effective waterproof
Independent configuration per channel
2. Built-in gesture/event recognition:
Click/Wear detection
Linear slide detection
Wheel slide detection
Capacitive force detection
3. 400kHz I2C interface
Default address: 0x12
Address can be modified through CS2 pin
4. External interrupt pin INTN, open-drain output
5. Built-in brown-out reset(BOR)
6. Power consumption
Active mode:27.5μA
Doze mode:12μA
Sleep mode:10μA
Deep Sleep mode:6.5μA
7. 2.7V~3.6V power supply
8. QFN 3mm×3mm×0.55mm-24L package
AW93208GQNR is an 8-channel capacitive proximity and touch controller mainly used for wear detection, touch key, linear slider, wheel slider, etc. The chip can realize accurate position detection for lamp dimming, volume adjustment, etc.
AW93208GQNR can recognize various gestures, such as single/double/triple click, short/long press, linear slide and wheel slide with the high-resolution capacitive sensing. The chip integrates mutual capacitive technology and dedicated algorithm, which greatly improve the waterproof performance for touch key.
The built-in ultra-low-power MCU and 16KB flash realize AFE sampling control, signal filtering, RF noise suppression, adaptive temperature compensation, baseline tracking, touch/wearing status determination, etc. The chip can flexibly customize the program and support online upgrade function.